STUVA and FOLJA loft bed with 2 drawers and 2 doors

White drawers and doors

Height: 76 "
Bed width: 41 1/2 "
Bed length: 77 1/2 "
Mattress length: 74 3/4 "
Mattress width: 38 "

Height: 193 cm
Bed width: 105.5 cm
Bed length: 197 cm
Mattress length: 190 cm
Mattress width: 96.5 cm

 With this loft bed you get a complete solution for your child’s room – including desk, wardrobe and open shelf unit.
You can assemble the desk parallel, perpendicular, or complete with 2 ADILS legs for a free-standing desk.
If you choose to assemble the desk perpendicular to the bed, you can access the wardrobe from both sides.
To reduce the risk of slipping, the ladder has anti-slip grooves.
It´s easy to keep sockets and cords out of sight but close at hand with the cable outlet at the back.

Ebba Strandmark / IKEA of Sweden

Bed base included.
The ladder can be mounted on the right side of the bed only.
High beds and the upper bed of bunk or loft beds are not suitable for children under 6 years of age due to the risk of injury from falls.
The mattress must be max. 7⅞" thick in total in order not to exceed the safety marking on/by the upper part of the ladder.
It is important not to screw hooks or handles onto the bed or hang ropes or belts in which children can get caught when playing.
Min. ceiling height required: 94½".

Loft bed frame, desk and storage:
Head/footboard/ Bedside/ Frame/ Shelf: Fiberboard, Particleboard, Paper, ABS plastic, Foil, Acrylic paint
Bed base: Fiberboard, Coarse particleboard (OSB), ABS plastic, Foil, Acrylic paint
Ladder: Particleboard or MDF, ABS plastic, Foil, Acrylic paint
Step: Solid birch, Acrylic paint
Supporting rail: Galvanized steel

Clothes rail:
Clothes rail: Steel, Pigmented epoxy/polyester powder coating
Support: Polypropylene

Shelf:
Particleboard, Honeycomb structure recycled paper filling, Foil, ABS plastic

Drawer without front:
Main parts: Particleboard, Foil
Drawer bottom: Fiberboard, Acrylic paint

Door:
Main parts: Polypropylene, Clear acrylic lacquer
Paper: Paper
Door: Particleboard, Foil, Foil

Drawer front:
Main parts: Polypropylene, Clear acrylic lacquer
Paper: Paper
Front: Particleboard, Foil, Foil

Loft bed frame, desk and storage/shelf/drawer without front:
At least 50% (weight) of this product is made from renewable materials.
Product possible to recycle or use for energy recovery, if available in your community.
Clothes rail:
Product possible to recycle or use for energy recovery, if available in your community.
Door/drawer front:
The material in this product MAY BE recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.